Courses
Flange & Gasket Installation Jointing
Course Description
The EUSR-endorsed course provides industry best practice for setting up, bolting, and completing water mains flange and gasket joints meeting UK and Water Company Standards. The course also meets the NOS (National Occupational Standard) for jointing materials by mechanical means on water networks.
Using the Lion Bluetooth Torque Wrench Gun, all candidates will complete flange and gasket joints on water mains (80 mm to 300 mm) as part of the training programme.
Course Aims
The course provides candidates with theoretical knowledge and hands-on experience to set up and complete flange and gasket joints following UK industry best practice.
Candidates will be taken through the principles of flange and gasket jointing inclusive of the following:
- What is a flanged joint
- Bolt conditions
- Pre-Load
- Bolt grades
- Torque vs Tension
- The effect of lubrication to a nut and bolt
- Bolt tightening best practice sequence
- Set up and use of the Lion Bluetooth Torque Wrench Gun, and associated app
Who Should Attend?
The course is designed for operatives, managers, and supervisors, who are carrying out or overseeing the completion of flange and gasket jointing installations on new and existing water mains.
FAQs
How is the course delivered?
The course consists of theoretical training, practical demonstrations, and candidates successfully completing flange and gasket jointing of water mains. Our qualified trainer will carry out direct observations of all candidates completing the flange and gasket joints to ensure the correct procedures, approach, and techniques have been followed.
The practical element of the course involves the selection of the appropriate grade gasket, nuts, bolts, and washers, combined with the correct setup, lubrication, and tightening of 80mm and 300mm flanged joints together with a simulated pressure test to ensure leak-free joints made. The bolting sequence is completed using the Lion Bluetooth Torque Wrench and associated app.
A multiple-choice assessment is completed at the end of the training with a minimum pass mark of 70%.
How long will the course last?
This is a 1-day course. Our courses run from 8:30 - 16:30.
What is the course eligibility?
Candidates should have a proficient level of English to participate in this course.
What are the course pre-requisites?
Preferred, but not essential for candidates to have relevant industry experience.
What PPE is required?
Candidates should bring appropriate PPE as follows:
- Safety Footwear
- Overalls
- Hi-vis Jacket
- Safety Glasses
- Gloves
- Hearing Protection
- Hard Hat
- Waterproofs
What certificates will be achieved?
Upon successful completion of the course, candidates will be registered on the Energy and Utility Skills Register, where registrations are valid for 3 years from the date of the training. Candidates will also be issued a Virtual EUSR Registration card. Physical cards can be provided upon request.
| Course Name | Start Date | Course Location | Duration | Places Left | Delegate Price |
|---|---|---|---|---|---|
| 17/05/2024 | MTL Training Room Bracklinn | 1 Day | 6 | £230.00 | |
| 04/06/2024 | MTL Training Room Bracklinn | 1 Day | 8 | £230.00 | |
| 01/08/2024 | MTL Training Room Bracklinn | 1 Day | 8 | £230.00 | |
| 02/10/2024 | MTL Training Room Bracklinn | 1 Day | 8 | £230.00 | |
| 16/12/2024 | MTL Training Room Bracklinn | 1 Day | 8 | £230.00 |
Featured Course
Energy & Utility Skills (EUSR)
Category 1: Locate Utility Services (HSG47), as agreed by industry representatives, defines the minimum training and assessment required for those working to safely detect utility services using recognised and approved detection methods. The standard does not preclude employers and providers from adding to the standard in their own training programmes. The standard has been derived from the following National Occupational Standards: